Team 2853 presents...their Book of Electrical

[cgmv123]

Originally Posted by Danny Diaz

Spike - it should be noted that a spike can also use a 20A snap-action breaker and is not limited to a 20A fuse.

Also note that this is only legal when powering a compressor.

When wiring your Camera, be careful - the metal post sticking out of the camera is likely connected to the common (ground) wire of the power input. Make sure the camera mount is insulated from the robot frame.

This is only true on the old Axis 206 camera. The M1011 and M1013 do not have this problem.