|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#5
|
||||
|
||||
|
Re: Starting configuration in the Goalie Zone
Hint #2
4.1.4 R4 In the STARTING CONFIGURATION, the ROBOT must constrain itself such that no part of the ROBOT extends outside the vertical projection of the FRAME PERIMETER, with the exception of minor protrusions such as bolt heads, fastener ends, rivets, etc. Nowhere does it state a horizontal limit. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|