Layout of off-board compressor (featuring sweet pics)

[rich2202]

Originally Posted by CENTURION

As far as I know, these connectors are legal for FRC use (Though as you said this is an off-season project, that may not matter).

It is an R77-f part. Make sure it is COTS, and bring the pressure rating.

R75 - Must be rated for at least 125 psi. If rated for less, at a regional, we will let you use it if your switch and pressure relief valve are set for the lower rating (robot compliant with the spirit of the rule). At the championship, I am guessing they will not let you compete with the under rated component (robot fully compliant).