|
|
|
 ... One of the things I happen to like about the Chief Delphi community is that at every competition I go to, someone recognises me and comes over to say hi ... I meet someone new, they meet someone new, and it's win/win. - EddieMcD [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Wiring a pressure transducer
Hello.
I recently discovered that we have a pressure transducer from the 2004 kop lying around, completely unused. I was able to find the spec sheet for the transducer here: http://team358.org/files/pneumatic/5...sureSensor.pdf I believe I am to connect this via pwm to the analog breakout; however, I found that the ports on the breakout supply 5v at .25 amps, whereas the transducer is rated for 8 mA at best. Do I need to add a resistor in parallel from the power to reduce current, or am I missing something obvious here? |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode