[FRC Blog] Orlando Incident

[Jon Stratis]

Magnets -
Look at it from the perspective of the Robot Rules - if whatever is being done possibly impacts a Robot Rule (from an inspectors perspective), then you need a reinspection. This includes removing item's/material (we need to make sure the removal doesn't create/expose a sharp edge, leave an exposed wire touching the frame, etc), adding items or material (similar concerns as removal, including other concerns like the starting configuration), or performing adjustments to existing items on the robot that have the potential to create an issue (starting configuration, height, safety).

So generally speaking, tightening a bolt that has worked its way loose isn't going to be a problem, so long as tightening it does not alter the configuration the robot was inspected in (for example, I can envision a robot design where a bolt can be adjusted to move a piece in or out to alter the configuration, which may expose sharp edges or affect the starting configuration... that would need a reinspection).

It is impossible to create a list of what actions do/do not require a reinspection. We trust teams to act in good faith and to generally not make changes at an event that would cause an issue. However, stuff happens, and that's why I always try to have inspectors in high-profile places like queueing and watching the field to help ensure we catch everything as it happens.