Activating iMates in Autodesk 2014

[Electric Sheep]

Hi, We are new to Autodesk. We have practiced with an older version used for the Autodesk Vex curriculum at the Vex website site here http://curriculum.vexrobotics.com/. The parts from the library (which are downloaded from the website) when placed as a part have the iMates visible by default. Makes Inventor easier to use (my opinion). I have a some Vex Libraries downloaded from the Vexcad site to ise with AD 2014 but they do not display the iMates. How do I get this to work.

-thanks

the Electric Sheep

[TheKeeg]

Here is something that you may find helpful

http://www.g-wlearning.com/cad/97816...F/SupMat02.pdf

Do you have access to the create iMates tool using the iMate dialog box?

[Electric Sheep]

Thank you for the link . Ad yes I have the create iMate I in the Author group.
Thanks again. Will let you know how I make out.

[Electric Sheep]

Hello theKeeg,

Do the parts libraries have to be in some special format? As I mentioned earlier I posted that I downloaded the vex cad libraries from tone Vex wiki. They are in a step file format. Can't get them to work.