|
|
|
 On the other hand, if the tires were marked "NOT FOR FRISBEE SHOOTER USE" I'd be worried. - Ken Streeter [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools |
Rating: 
|
Display Modes |
|
|
|
| On the other hand, if the tires were marked "NOT FOR FRISBEE SHOOTER USE" I'd be worried. - Ken Streeter [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools |
Rating:
|
Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: Activating iMates in Autodesk 2014
Here is something that you may find helpful
http://www.g-wlearning.com/cad/97816...F/SupMat02.pdf Do you have access to the create iMates tool using the iMate dialog box? |
|
#2
03-05-2014, 09:30
|
|||
|
|||
Re: Activating iMates in Autodesk 2014
Thank you for the link . Ad yes I have the create iMate I in the Author group.
Thanks again. Will let you know how I make out. |
|
#3
03-05-2014, 09:44
|
|||
|
|||
|
Re: Activating iMates in Autodesk 2014
Hello theKeeg,
Do the parts libraries have to be in some special format? As I mentioned earlier I posted that I downloaded the vex cad libraries from tone Vex wiki. They are in a step file format. Can't get them to work. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
