|
Re: Nvdia and FIRST?
Quote:
Originally Posted by luckof13
The main factor in in-application performance is going to be the CPU clock speed. Autodesk recommends at least 3.0GHz. The RAM amount will affect the size and amount of parts that can be open and worked on at a time. The hard drive speed will affect how fast parts load and save. GPU and CPU cores will affect rendering times.
|
I have a haswell i5 @3.4ghz, 16 gigs of ram, and a SSD. The hardware is not the limiting factor here.
The software simply is, as far as I can tell, poorly-optimized and clunky
__________________
"Mmmmm, chain grease and aluminum shavings..."
"The breakfast of champions!"
Member, FRC Team 449: 2007-2010
Drive Mechanics Lead, FRC Team 449: 2009-2010
Alumnus/Technical Mentor, FRC Team 449: 2010-Present
Lead Technical Mentor, FRC Team 4464: 2012-2015
Technical Mentor, FRC Team 5830: 2015-2016
|
John is the king of vague, but then again he looks much better at a distance than he does up close :D - Rich Kressly [more] 
12-05-2014, 13:08
Threaded Mode