CAD Design of VIAIR 90C Compressor

[Aren Siekmeier]

Originally Posted by ArtemusMaximus

There some discrepancies between sheet and actual measurements.
For example A states 5.94", but on actual compressor it is over 6", about 6 1/32" (my caliper maxes out at 6")
Checking PDF sheet you sent, here are my findings (actual measurements):
A=6.02"
B=2.052"
C=4.6"
D=5.545"
E=1.42"
F=1/4" (I suspect this is just different fitting)

Thanks for the model. Very detailed.

Somehow when I import it into Solidworks get some different numbers:
A=5.98"
B=1.98"

D=5.439"
E=1.36"

Whenever I get access to our compressor I'll see if I can get some measurements as well.