|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating:
|
Display Modes |
|
#14
|
||||
|
||||
|
Re: Questions about building a West Coast Drive with VersaChassis
We have built west coast drives for the last several years using either a toughbox or supershifter with the long hex aluminum output shafts. the wheel is held on by the screw in the end of the shaft, the sprockets to drive front and back are between the inside of the frame and the transmission. the transmission is then mounted to frame crossmembers.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|