|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
|
||||
|
||||
|
Re: Gearing for a Very High Speed
I'm not sure how reducing the motor power to 50% is really helping you. If a high speed isn't controllable, why not just change the gearing so that is at a more reasonable speed? If you reduce the motor power by 50% then you'll barely be going faster than your low gear and you'll have half the torque that the low gear has.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|