|
|
|
 I GET that FIRST is about more than winning on the field. BUT... ...it is my experience that the great programs of the FIRST world almost always build on a foundation of competitive robots. Success on the field begets success in other realms. - Joe Johnson [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating: 
|
Display Modes |
|
#11
06-08-2014, 00:18
|
|||||
|
|||||
|
Re: 1551 Off-Season Drive Train Project
What Colin Said.
Also http://www.chiefdelphi.com/forums/at...8&d=1407293863 It looks like you have e-clip grooves on the outside of the bearing and also at the end of the shaft to retain the wheel. You will be better served to remove the interior groove because it creates a failure point in the shaft that's seeing a lot of torque. Use spacers to maintain the gap you like between the rail and the wheel and keep the e-clip on the very ends of the shaft. Nice work. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode