FIRST's one hour drive

Duke 13370 · #1 22-02-2003, 23:36

did anyone else use the 1 hour drive. We used it exactly as it was planned (it only took us a week to build and 2 more to fix).

I know 222 used something similar, but that's the only other team i have seen that used it.

JanHorning · #2 25-02-2003, 13:57

We used it as a learning experience. It only took a day or two to put together but it was clear that the motors wouldn't have the power we wanted. Still it was good for the newbies to see how a gear box looksa and what ti does. They better understood the process when we machined the new parts.
J.

team222badbrad · #3 25-02-2003, 17:07

What are you talking about? Please explain

jmort03 · #4 25-02-2003, 17:12

we used the hour gear block + two other transmissions with the CIM. it works really good. it goes about 6 ft a second and has alot of torque

team222badbrad · #5 25-02-2003, 17:29

Our drivetrain is nothing like the drivetrains FIRST handed out in the kits. The only pieces we used for our drive train from the kit are: The drill motors, gearboxes, and servos. We machined our own mounts and made everything.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1 stick drive to 2 stick drive	wayne 05	Programming	18	01-04-2004 16:41
how does crab drive work?	Soukup	Technical Discussion	13	25-04-2003 11:31
Direct drive or Chain?	Suneet	Technical Discussion	32	27-03-2003 23:00
what's your most important drive train advice?	Ken Leung	Technical Discussion	42	07-01-2003 09:58
"Motors and Drive train edition" of Fresh From the Forum	Ken Leung	CD Forum Support	6	29-01-2002 12:32