pic: Shifting Drivetrain with Transmissions

[R.C.]

Originally Posted by compwiztobe

What's your experience with the 0.251 ream on the encoder bore? I've wondered how close of a fit we'll want, and we haven't tested anything yet. How easily can you insert and remove the encoder, and how well does it stay engaged with the shaft?

Aren,

We've done a .2505 - .2510 ream for the past few years. We have never had an issue, most of the time we've been able to slide in and out with little force. We used to just drill the hole but switched to a drill + reamer to get a nicer fit.

We use the S4 with a ball bearing so there is very little drag.