Attention New England Teams: Free CNC Routing Table (No Router Included)

[Brandon Holley]

Hey Everyone-

We have an older X-Y table w/ Z attachment in our lab. We had plans to convert it into a CNC router, but one of our sponsors has hooked us up with a newer and bigger table to do this on.

The table has a 4'X4' cutting area, but needs some work as far as controls and potentially new motors (to make it easier to control) and a routing head. Our research estimated that for about $500 we could turn this into a very useful piece of equipment for our team.

Our new table arrives this weekend and we need to ditch the old one ASAP. Instead of scrapping it or leaving it outside to rust, we wanted to offer it to any FRC team that may be interested. I would be happy to share what I know about the table and what research we have conducted with whomever picks the table up.


The catch: Ideally we want this thing gone within a week and you will either need a decent sized pickup or to take part of the table apart to get it out of here. We can help load it if that helps as well.


See attached photos if you're interested and shoot me a PM or an email at brandonjholley [AT] gmail [DOT] com.

-Brando