Where to buy cheap aluminum sheet

[Joe G.]

Originally Posted by Lyler1

Does anybody have any sources besides McMaster to buy 5052 sheet aluminum? McMaster sells for $11 per square foot when buying 48" x 48." Are there any cheaper options?

Look through your phone book for local metal distributors, you'll get the best deal there. McMaster is great for many things, but large pieces of raw material isn't one of them.

[Chris_Elston]

If we need something same day, we have a Metal Supermarket near by.

http://metalsupermarkets.com/fort-wayne

They will even cut it to the exact size you need free of charge.

[TikiTech]

Originally Posted by Chris_Elston

If we need something same day, we have a Metal Supermarket near by.

http://metalsupermarkets.com/fort-wayne

They will even cut it to the exact size you need free of charge.

SO JEALOUS!

We have to ship all stock in far in advance of build season.. Nothing out here but fish!

Originally Posted by snoman

we got a lot of aluminum road signs donated by our local US Forest Service. you could try checking with your highway departments. kinda low quality aluminum but it works good for some stuff

I like this! IF there is missing signage check your local robotics team!

[llamadon]

http://www.kurlandsteel.com/contact.html

This is the website of a metal distributor in Urbana, the town next to your team (assuming you are on 4096). They seem to cut to size and have a decent selection. I would give them a call and get a quote on pricing.

[Qbot2640]

Originally Posted by llamadon

http://www.kurlandsteel.com/contact.html

This is the website of a metal distributor in Urbana, the town next to your team (assuming you are on 4096). They seem to cut to size and have a decent selection. I would give them a call and get a quote on pricing.

We get our sheet aluminum from a local steel supplier (Tri-State Steel, Reidsville - shameless plug for the best metal supplier in the world) and I would concur that the advantages of dealing with someone local or at least semi-local are many and significant. Last season we were able to have metal drop-shipped for free to our fabricator with a one day turn-around (they were faster than our CAD team - the material arrived before the drawings!). Plus, most (possibly all) of what they supply to us they donate...we reciprocate by advertising their generosity, and shamelessly plugging them on CD!

[MrRoboSteve]

We have Discount Steel and Metals Supermarket, plus a couple scrap dealers. I've found Metals Supermarket to be a bit more expensive than Discount Steel, but it's closer to our school.

For reference, the 36"x48" 5052 0.063" price at Discount Steel is $39.57. The 48"x144" is $168. I usually go over there and pick from the cutoff rack as that's often cheaper than getting a newly cut sheet.

Packaging thin metal like that for shipment is very expensive. I agree with others that you should find your local supplier for that sort of material. If you can't figure out who it is, you should call a local machine shop and ask to talk to the person who does their buying -- they'll be able to send you to the right place.

[protoserge]

Places to inquire:

• Machine shops
• HVAC fabricators (they buy lots of sheet material and will typically get a good price from a supplier).
• Auto body repair
• Welding companies
• Contractors and construction companies
• Metal supply distributors

www.midweststeelsupply.com has some good prices, but shipping may be cost prohibitive.

[kristinweiss]

Our team normally buys our aluminum from SAF (http://www.saf.com/) and they tend to be cheaper than McMaster when buying in large quantities and sizes.