New Electronics System Diagram

[TikiTech]

Originally Posted by Alan Anderson

I am highly confident that the 2015 robot rules will permit only the D-Link bridge/router to be connected to the 5V/2A output of the Voltage Regulator Module. Powering an Axis camera as you show is not likely to be permitted.

There are two connections for of each of the different voltage outputs. From what I have seen the camera and Dlink both use one 2a output each..

A good overview was posted by Simbotics the other night
http://www.youtube.com/watch?v=o1T9B...OX8kFryYAO4NTA
That is how they have their beta board wired, though They did mention they only have power to the camera at the moment and haven't started programming it.

I agree with the other statements. This need to be more specific on what wiring you are trying to describe. If you wish to do power, then leave other control wiring off. I suggest making several, one for power, one for control.

Otherwise a great project to work on. It will always be beneficial to learn as much as one can prior to actual delivery of the KOP.

Keep at it!

Aloha