MakerBot Lottery

[ghesla]

We got too!

[Mr.Frishman]

Team 3999 was selected as well.

[mman1506]

We got selected also. More info on the printer is here https://www.youtube.com/watch?v=fDiBNOKWtVI#t=2060

[wilsonmw04]

I got an email as well. However, in the email it states team 1806 won. I think it's a typo, but when I sent an email to 3dprinters@usfirst.org as instructed for questions, the email was kicked back as "The e-mail address you entered couldn't be found. Please check the recipient's e-mail address and try to resend the message. If the problem continues, please contact your helpdesk."

Weird.

[Sohaib]

Originally Posted by wilsonmw04

I got an email as well. However, in the email it states team 1806 won. I think it's a typo, but when I sent an email to 3dprinters@usfirst.org as instructed for questions, the email was kicked back as "The e-mail address you entered couldn't be found. Please check the recipient's e-mail address and try to resend the message. If the problem continues, please contact your helpdesk."

Weird.

The email posted here is 3dprinter@usfirst.org. You may want to try this one.

[wilsonmw04]

two typos in the same email? nice!

[wilsonmw04]

Originally Posted by wilsonmw04

two typos in the same email? nice!

one of the typos was mine and the other was there's. We got a printer!

[DarrinMunter]

This is what you got sent if you weren't selected:

Thank you for applying for the EKOCYCLE™ Cube® Printer Giveaway sponsored by 3D Systems and The Coca-Cola Company on behalf of FRC team 2081. Over 2200 teams applied for this opportunity. Unfortunately, there are only 1600 printers available and your team was not among those selected this time. Again, we thank you for your time and wish you good luck with your season.

[Adamz_]

Originally Posted by Munter2081

This is what you got sent if you weren't selected:

Can confirm, 4519 also received one of these emails.

[DonRotolo]

Thank you for applying for the EKOCYCLE™ Cube® Printer Giveaway sponsored by 3D Systems and The Coca-Cola Company on behalf of FRC team 1676. Over 2200 teams applied for this opportunity. Unfortunately, there are only 1600 printers available and your team was not among those selected this time. Again, we thank you for your time and wish you good luck with your season.

1676 got one of these too. Ah well.

[David Brinza]

Team 980 received both emails! We only submitted one application.

We received the "Congratulations!" email at 10:51a PST, then a rejection email at 12:21p PST.

We replied to the Congrats email indicating we received a rejection email.

Wonder how this will play out...

[EricH]

Originally Posted by David Brinza

Team 980 received both emails! We only submitted one application.

We received the "Congratulations!" email at 10:51a PST, then a rejection email at 12:21p PST.

We replied to the Congrats email indicating we received a rejection email.

Wonder how this will play out...

There isn't an FTC team 980, is there? They might have gotten mixed up.

[waialua359]

We are receiving one as well!

[seg9585]

Team 4276 got an EKOCYCLE printer as well! Now we have this one plus the Cube from last year. Looking forward to trying out the "recycled" filament.

Yesterday during our CAD training session, I challenged a student to CAD up a water bottle we could 3D print with it. So we can convert old water bottles, into recycled printer filament, back to a usable water bottle! This will be the first "test" part on our queue once we get the new printer, haha.