Drivers using Google glass

[z_beeblebrox]

2014 R95:

Other than the system provided by the ARENA, no other form of wireless communications shall be used to communicate to, from, or within the OPERATOR CONSOLE.

Unless it is plugged into the driver station computer, Google Glass would probably not be legal.

(Obligatory disclaimer on how 2015 rules may differ)

[evand4567]

$10 Cheezy uses a HUD next year...

[EricH]

Originally Posted by evand4567

$10 Cheezy uses a HUD next year...

Teams have been using HUDs since at least '06, off and on. 3 LEDs mounted onto a pair of safety glasses worn by either the driver or the operator or both can be pretty decent as a target assist in shooting games.

Any HUD, unless the 2015 rules change this, would have to be wired to the operator console, and plugged in AFTER automode (or put on after automode).

[CalTran]

Originally Posted by EricH

Teams have been using HUDs since at least '06, off and on. 3 LEDs mounted onto a pair of safety glasses worn by either the driver or the operator or both can be pretty decent as a target assist in shooting games.

Any HUD, unless the 2015 rules change this, would have to be wired to the operator console, and plugged in AFTER automode (or put on after automode).

I've seen examples of this in the Aim High book, but never in person, and now seems like a good time to ask how they worked in terms of the lights being on safety glasses, but it being necessary to wear safety glasses all the time while still not wearing the glasses for the whole not touching controls thing.

[EricH]

Originally Posted by CalTran

I've seen examples of this in the Aim High book, but never in person, and now seems like a good time to ask how they worked in terms of the lights being on safety glasses, but it being necessary to wear safety glasses all the time while still not wearing the glasses for the whole not touching controls thing.

As I recall the set I saw (294, if memory serves), it was a clip-on unit. Grab, clip to glasses, aim, shoot. Or else it was plugged in after auto (the other option), or the driver managed to switch safety glasses right away. I'd have to ask someone who worked with it.

[Mark McLeod]

Ours in 2006 had a cable from the safety glasses with a large phono jack that detached from the control board while the operators stood back during Autonomous, then were plugged in as the drivers stepped forward.

The glasses had an LED on each side that told the operator when the turret was aimed to far to one side or the other.
Both LEDs were on when the target was centered.

[cad321]

This here is something that I have been considering experimenting with before the build season. It is diy, involves 3d printing and allows for a live stream of either a camera feed or live variables.

[yara92]

it is fun to have it , But I am considering in the electromagnetic radiation

[Alan Anderson]

Originally Posted by EricH

Teams have been using HUDs since at least '06, off and on.

Sometime before I started with the team in 2004, the TechnoKats had a set of "magic goggles" that connected to the driver station. Two LEDs mounted to a pair of safety glasses gave feedback on high/low gear (the control was a foot pedal toggle function) and something else I don't know.

They haven't been used while I was part of the team. Feedback of that sort is now implemented by using LEDs on the robot itself.

[waialua359]

Originally Posted by Alan Anderson

They haven't been used while I was part of the team. Feedback of that sort is now implemented by using LEDs on the robot itself.

Yes! We used LED's on the robot to tell our HP in 2011 which tube we wanted thrown out onto the field.

[Peyton Yeung]

We used LEDs in 2013 to show one color when our shooter was turned on and another color when they were at the ideal speed. IIRC 341 and 33 did something similar in 2012.

[Jared Russell]

Originally Posted by Peyton Yeung

We used LEDs in 2013 to show one color when our shooter was turned on and another color when they were at the ideal speed. IIRC 341 and 33 did something similar in 2012.

254 did this in 2014 as well.

It is useful for all four members of the drive team to be able to see the same status signal without needing a bunch of wearable devices and cables. The approach helps to quickly diagnose problems in the pit as well. If you are sensitive to the other alliance being able to see it during competition, well, put it on the back of your robot.

[BBray_T1296]

How about a tall piece of lexan or something that is attached to the DS at a negative slope, with the bottom behind the DS laptop and the top hanging over it, high enough to be above eye level. A projector could plaster info onto the sheet, similar to the HUD on higher end cars showing RPM, Speed, Gear etc. on the glass windshield.