Quote:
Originally Posted by Jared
Agreed. Your drill chuck won't be the limiting factor in finding that edge. More likely, you'll lose accuracy from your mill/drill press not being trammed and the actual edge finder itself (only good to within a few thou).
A drill press really isn't as accurate as a mill even if you're just drilling holes and not taking any passes with an endmill. It's just not made to be as accurate.
|
An edgefinder is better than a few thousandths. The good ones (Starrets are like $10 on ebay) are good to a thousandth or better.
You will find that most people in good companies are real people that share the same values and concerns as all of us. - ebarker [more] 
26-11-2014, 16:18
Threaded Mode