CAN connection on roboRio.

I am mentored by individuals younger than 18 all the time. - Taylor [more]

		Chief Delphi > Technical > Electrical > CAN
CAN connection on roboRio.

Thread Tools

Rate Thread

Display Modes

11-12-2014, 11:25

FrankJ

Robot Mentor

FRC #2974 (WALT)

Team Role: Mentor

Join Date: Feb 2011

Rookie Year: 2009

Location: Marietta GA

Posts: 1,886

Re: CAN connection on roboRio.

The JAGs have a built in RS232 port that is on the same receptacle as one of the CAN bus ports. Since the RoboRio has a CAN port you will not use the RS-232 port on the JAG. So yes, wire the Can H & L to the jags & ignore the RS-232 port on the Jag. Just like the Jags on the old system that was not directly connected to the Crio.

__________________
If you don't know what you should hook up then you should read a data sheet

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 20:11.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.