|
Anderson Power Pole for motors
We have been considering using Anderson Power Pole connectors in conjunction with the new Victor SP or Talon SRX. Here is an example of the connectors we are considering.
The concern I have is their current rating is 45 Amps. When we do the calculation on possible max current we may pull through them is a pushing match etc, we come up with numbers that are 50% higher than that quite often.
I realize the pushing match current is usually a short term current, but sometimes it runs a several seconds longer than desired.
So, what has been your experience with these, or this type of connector when used in drive trains?
__________________
CalGames 2009 Autonomous Champion Award winner
Sacramento 2010 Creativity in Design winner, Sacramento 2010 Quarter finalist
2011 Sacramento Finalist, 2011 Madtown Engineering Inspiration Award.
2012 Sacramento Semi-Finals, 2012 Sacramento Innovation in Control Award, 2012 SVR Judges Award.
2012 CalGames Autonomous Challenge Award winner ($$$).
2014 2X Rockwell Automation: Innovation in Control Award (CVR and SAC). Curie Division Gracious Professionalism Award.
2014 Capital City Classic Winner AND Runner Up. Madtown Throwdown: Runner up.
2015 Innovation in Control Award, Sacramento.
2016 Chezy Champs Finalist, 2016 MTTD Finalist
|
Forget Pool Basketball or Pool Volleyball, it's time for some Pool Rack n' Roll! - Conor Ryan [more] 
Threaded Mode