Go to Post I know FIRST is all about changing society. But my approach is one person at a time. - Phil 33 [more]
Home
Go Back   Chief Delphi > Technical > Technical Discussion
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
 
 
Thread Tools Rating: Thread Rating: 3 votes, 5.00 average. Display Modes
Prev Previous Post   Next Post Next
  #11   Spotlight this post!  
Unread 22-12-2014, 19:11
DonRotolo's Avatar
DonRotolo DonRotolo is offline
Back to humble
FRC #0832
Team Role: Mentor
 
Join Date: Jan 2005
Rookie Year: 2005
Location: Atlanta GA
Posts: 7,014
DonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond reputeDonRotolo has a reputation beyond repute
Re: Tips for Accurate Measuring and Machining

Quote:
Originally Posted by Pat Fairbank View Post
My favorite set of low-tech tools for laying out holes and lines consists of a combination square, a blue marker, a scribe, and a center punch. When marking a hole, for instance, you can set the combination square to the X and Y distances to the hole from the edges of the workpiece, and scribe two lines to establish the point (use the blue marker to provide some contrast before scribing). Then mark the hole with a center punch, and drill with a center drill before the actual size you want, as twist drills tend to walk.
Requoted for truth.
If you use a sharpie with a 1/8" thick tip to mark your spot, the best accuracy you'll get is 1/8". Instead, use the marker to mark nearly the spot, then use a scribe or other sharp object to mark exactly the spot.

If you make a cross or X with a scribe, you can 'feel' the intersection of the lines with your center punch, ensuring you hit the mark perfectly.

Measurement and markout is a skill and the techniques can be learned, just put in some effort and don't settle for 'close enough'. After a while you'll get fast at it too.
__________________

I am N2IRZ - What's your callsign?
 


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 17:26.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi