Because the new Talons and Victors both have in-built wires instead of the screw-on connectors from the old talons, jags, spikes, and old victors, it should be possible to do a fair amount of robot wiring without any soldering at all.
Here's the AM page for the connectors that I'm talking about.
http://www.andymark.com/product-p/am-2575.htm
The only concern I have is the current limit- The PDB is rated for 40 amps, but these have a max of 32A at 600V (I don't know enough about electrical stuff to discern whether we're safe because the robot is just at 12V)
Regardless, I think you could do some really, really nice robot wiring with these. I've seen one before, and the hold they have on the wire is about as strong as the jaws on the PDB.
I love the idea of a robot without almost any soldering at all- soldering 20+ electrical connections can be time consuming, and bad solders coming apart in a match are a surefire match-loser. Complete Plug-and-play connections would make wiring super fast and very painless. Plus, it seems that you could buy all the connectors needed for a robot for less than $50, which is a total steal considering how much time they will save during build season.
What do you guys think?
And people laugh at me when I suggest 14" wheels. - Munchskull [more] 
Threaded Mode