pic: Swerve again, for fun

[asid61]

Originally Posted by AdamHeard

I don't think theoretical weights are fair to compare. If the system isn't made and working, it doesn't matter how light it is.

I could go design a 4 lb swerve now, no guarantee it will work or hold up. Many of the recent designs posted aren't robust enough to survive a season (I think Aren's here would though, as he's fielded 5+ swerves at this point I think).

We're looking at a theoretical model right now, so it makes sense to compare theoretical weights. Kevin's theoretical weight for his shifting design posted a few months ago was ~7lbs IIRC, whereas Bryce's models for shifting designs weighed around 6.3lbs. Even if it wouldn't survive a season as in the CAD, there's at least 0.5lbs to play with to buff it up. And Kevin's design used only small steel miter gears, whereas this design uses much larger steel bevel gears.
Given that, I think it's possible that this weighs more than many designs posted previously. However, it is much more compact, and for many situations that can be more valued than the weight.

If you believed that none of the recent designs can survive the season, then you really should have said so ealier, when those designs were posted.

Also, I found this yesterday:
http://www.chiefdelphi.com/media/photos/34178
So Aren beat himself some years ago.

EDIT: How is the bevel gear constrained axially on the shaft? Does it depend on the wheel to position itself properly?