|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Saving a mirror image of an assembly (Creo 2.0)
Hi everyone,
I originally posted this on the PTC FIRST forum a couple of days ago, but it is still being moderated so I thought I would try here. Thanks if you can help! ---------- Hi, We've been learning Creo this year and were able to design most of our first FTC robot before building it (hooray!) So, sorry for the newbie questions. ![]() After getting a lot of the basics down, we are redoing our CAD so we tweak our design using what we've learned. So we have a few sub-assemblies built that we are going to use to make the final assembly easier and quicker to put together. The problem is that we are trying to "save a mirror assembly" for a rack-and-pinion lift and we end up with a scrambled assembly with a bunch of warnings. We found some documentation here for Creo 3 that seems similar, but can't locate the Creo 2 docs for some reason: http://help.ptc.com/creo_hc/creo30_o..._Assembly.html Any hints? ![]() Thank you! |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|