pic: 1086 Blue Cheese Legen-dairy Drive Mark4

[AlecMataloni]

Originally Posted by Electronica1

Originally it was a C frame that was .09, it was changed later in order to give the frame a bit more ground clearance (the location of the module pivot was determined by geometry, which ended up a bit too low to fit a bend on the bottom of the frame and still have acceptable clearance).

We have found this particular frame style to be more than strong enough for anything we will run into for frc.

You're right. This is the fourth iteration, so you guys have certainly thought this through better than I originally gave you credit for, my apologies.

It looks really slick, and I like it!