Team 1726 button toggle & SR Latch code

[wt200999]

You shouldn't have to worry about it for the robot code since when you 'deploy' the code (at least by default) debugging is disabled. You can see that this is true if you look under the Advanced category for the build specification in the default robot project. In fact I would leave it in for most of your VIs so when you load your code using just the Run button, you can still debug as usual.

Inlining the VI will give you some small performance benefits at the expense of larger compiled code. Just this check box alone will change your benchmark results. It is good for small widgets like the ones in this thread. For the reeentrancy you just have to be careful depending on the VI.

[BitTwiddler]

Originally Posted by wt200999

Inlining the VI will give you some small performance benefits at the expense of larger compiled code. Just this check box alone will change your benchmark results. It is good for small widgets like the ones in this thread. For the reeentrancy you just have to be careful depending on the VI.

Thanks for your insight regarding the inlining. I missed that one.

[nwall]

Originally Posted by wt200999

You shouldn't have to worry about it for the robot code since when you 'deploy' the code (at least by default) debugging is disabled

Oh, okay. Thank you! I figured this was the case, but I wasn't sure, because I haven't spent enough time in the settings.

Originally Posted by BitTwiddler

As a digital electronic technician (now retired) I am used to approaching these kind of problems at the lowest bitwise level. The use of the greater than comparison operator just seems wrong to me but that's just me.
.....
Since Labview is an optimizing compiler, it will probably come up with a more efficient solution during compilation anyway.

I assumed it was something like personal preference, but I was curious if there was something I didn't know about LabVIEW (turns out how to turn off debugging). Our previous programming lead showed me the greater than two years ago, and because it worked I've never really given it too much thought until today. Thanks for putting this up!