|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
|
|
Thread Tools |
Rating:
|
Display Modes |
|
|
|
#1
|
|||||
|
|||||
|
Re: ROBOT DIMENSIONS
Well not quite - you can't extend outside the field or onto the other side.
![]() |
|
#2
|
|||||
|
|||||
|
Re: ROBOT DIMENSIONS
The TRANSPORT CONFIGURATION is provided so that you can build a robot that can get through a standard door. While many venues have no obstacles between the pit and the field, many still require everything to enter and exit through 32 inch wide doors. With the door frame and hinges, 28 inches is about as wide as will fit through the opening. (Assuming there is no crash bar on the door.)
|
|
#3
|
||||
|
||||
|
Re: ROBOT DIMENSIONS
You can extend over the other side, you just cannot touch anything there. I'm not sure why this would be helpful, but it is permitted.
|
|
#4
|
||||
|
||||
|
Re: ROBOT DIMENSIONS
You can also disassemble your robot to fit it in the transport configuration. Just be sure you can reassemble it quickly enough once on the field.
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|