PSoC 4 Prototyping Kit

[wt200999]

Originally Posted by taichichuan

Yeah, I saw that the Launchpad can be used for I/O. But, it's not clear if the Leonardo and the PSoC can be used for anything except the "I". There's no mention of the "O" part in any documentation that I've seen so far.

The PSoC kit linked in this thread (www.cypress.com/CY8CKIT-049-42xx) will NOT be able to communicate with the driver station, at least without some serious custom development on the PC side. According to the documentation of the interface chip on that board (CY7C65211-24LTXI):

Can be configured to function in CDC, PHDC, or Cypress vendor class

The driver station only supports HID devices, so this board can't do the 'I' either. I don't know if the Leonardo can support the output.