|
|
|
 Every single team in FRC has had a rookie season. All those... have stories. Some are sad, some are funny, some are inspiring - but all the teams have stories to be told... Each year is a chapter in the team's history book with stories to be told and shared. - JaneYoung [more] |
 |
|
|||||||
|
||||||||
 |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Elevator System
I'm thinking about doing some sort of elevator pulley / winch / lift system in order to lift totes and bins off the ground. Does anyone have any ideas of where to start in terms of how to power it to move? So far I'm thinking about using the new REV robotics stuff from AndyMark to create a structure for the arms to move on, although how would you suggest doing it?
Thanks! Tyler |
|
#2
04-01-2015, 23:23
|
|||
|
|||
|
Re: Elevator System
Please read through these threads
http://www.chiefdelphi.com/forums/sh...light=ramp+973 http://www.chiefdelphi.com/forums/sh...light=ramp+973 I think you will find exactly what you need. Especially after you watch Adam's videos! |
|
#3
05-01-2015, 00:10
|
||||
|
||||
|
Re: Elevator System
http://tinyurl.com/frclift
Inspired by Ether Or you can check out a list I made in the other thread. Chris' presentation has some drawings of cabling techniques and 254's build blog will give you an idea of how they cabled their lift and spools in 2011. http://www.chiefdelphi.com/forums/sh...01&postcount=3 I forgot to add these: link 1, link 2 Last edited by Mike Marandola : 05-01-2015 at 00:13. |
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
