|
|
|
 ...or it might be good to avoid doing stupid things like smashing a thin metal casing with a steel hammer... - Cory [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| ...or it might be good to avoid doing stupid things like smashing a thin metal casing with a steel hammer... - Cory [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: roboRIO Driver Issue
We did the CD and the FRC Update Suite, then the NI Update Service.
|
|
#3
05-01-2015, 20:06
|
||||
|
||||
|
Re: roboRIO Driver Issue
Correct, USB not Ethernet.
|
|
#5
05-01-2015, 22:01
|
||||
|
||||
|
Re: roboRIO Driver Issue
We're going to do more troubleshooting tomorrow, but from what I remember, the computer recognizes that something is plugged into the USB port on the computer, but it does not have the drivers to support the roboRIO.
I don't know about the USB Ethernet driver, but I can update when I get back to school tomorrow.
|
|
#6
05-01-2015, 23:01
|
||||
|
||||
|
Re: roboRIO Driver Issue
Update: Windows does not recognize the USB ethernet driver.
|
|
#7
05-01-2015, 23:23
|
|||
|
|||
|
Re: roboRIO Driver Issue
The FRC update for your computer (the one that contains the driver station and the gamepad install) should also have your drivers for your RoboRIO, if not I would recommend going into device manager and manually specifying the driver, that should allow you to communicate with it like normal.
|
|
#8
05-01-2015, 23:35
|
||||
|
||||
|
Re: roboRIO Driver Issue
Thanks! We gave that a try today, but we weren't sure where the driver was. Do you know the directory of the correct driver? Thank you so much !
Last edited by JMankewitz : 05-01-2015 at 23:38.
|
|
#9
05-01-2015, 23:45
|
||||
|
||||
|
Re: roboRIO Driver Issue
The only drivers I can find are for PXI C:\Program Files (x86)\National Instruments\PXI\Drivers is PXI used for the roboRIO?
|
|
#10
06-01-2015, 07:43
|
|||
|
|||
|
Re: roboRIO Driver Issue
If you don't figure it out pretty quickly, please contact NI support. Start at ni.com/frc.
Greg McKaskle
|
|
#11
06-01-2015, 12:52
|
||||
|
||||
|
Re: roboRIO Driver Issue
The roboRIO USB Driver is at...
C:\Program Files (x86)\National Instruments\CompactRIO\Staging\USBLAN ... but if it didn't auto-register you might have other problems, Greg's suggestion is probably best.
|
|
#12
06-01-2015, 14:07
|
||||
|
||||
|
Re: roboRIO Driver Issue
Okay, we figured it out!
Here is what we did in case anyone else has this problem: 1) Followed these directions for installing labVIEW completely: https://wpilib.screenstepslive.com/s...5-labview-only 2) Following the instructions for the update suite completely: https://wpilib.screenstepslive.com/s...-all-languages 3) Download all NI Updates (one at a time and restart after each) 4) We also used a different USB A -> B cable to connect to computer The computer finally recognized the roboRIO, so we'll configure it today! Thank you all very much for the help, we really appreciate it. Good luck!
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
