Detailed Tote CAD File

[Bochek]

When i import the stp into inventor the totes are 16.25 x 26.75 instead of 16.9 x 26.9

[inventor_phild]

Adam,

As noted, the same 3D tote models are provided to all software vendors.

Can you direct me to the source of the 16.9 x 26.9 dimensions.

Thanks again for your input.

[Bochek]

I downloaded the STEP files from this link, http://a360.co/1tzEHlB opened them in inventor 2014.

The 16.9 x 26.9 are the dimensions listed in the manual, and what was measured on our actual tote provided in the kit of parts.

2.3.1 TOTES
Each ALLIANCE has access to two (2) types of TOTES; Yellow TOTES (Pantone 109M) and Gray TOTES (Pantone 423M). Each TOTE is
26.9 in. long,16.9 in. wide, 12.1 in. tall, and made of a rigid plastic.

Edit: I'm working on getting pictures of a tape measure on our actual tote.

[inventor_phild]

Adam,

Thanks. I am following up with the supplier of the 3D tote model to determine which dimensions we should use.

If we need to resize the 3D model it is an easy fix using Derived Parts.