|
|
|
 Don't be affraid of trying new things... Even if people say you are crazy, even if you get insulted, even if it involves a lot of time and money, try it. You can't know if it'll work or not if you didn't try it yet. - EDesbiens [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
||||
|
||||
|
Why do the pneumatics not work?
https://github.com/Patribots4738/BattleOfTheBorder
Here's our code on git. Currently the solenoid fires once and then the code crashes, and the compressor does not start. The pressure switch is wired correctly, NC connected to DIO signal and C connected to DIO (-). The compressor is wired to a spike, and the spike is connected to a RELAY port. In the code you can see that they're both correctly inputted (if the right code is uploaded of course). We're kind of stumped. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode