roboRIO Driver Issue

[nickmcski]

The FRC update for your computer (the one that contains the driver station and the gamepad install) should also have your drivers for your RoboRIO, if not I would recommend going into device manager and manually specifying the driver, that should allow you to communicate with it like normal.

[JMankewitz]

Thanks! We gave that a try today, but we weren't sure where the driver was. Do you know the directory of the correct driver? Thank you so much !

[Team3266Spencer]

The only drivers I can find are for PXI C:\Program Files (x86)\National Instruments\PXI\Drivers is PXI used for the roboRIO?

[Greg McKaskle]

If you don't figure it out pretty quickly, please contact NI support. Start at ni.com/frc.

Greg McKaskle

[ozrien]

The roboRIO USB Driver is at...
C:\Program Files (x86)\National Instruments\CompactRIO\Staging\USBLAN
... but if it didn't auto-register you might have other problems, Greg's suggestion is probably best.

[JMankewitz]

Okay, we figured it out!

Here is what we did in case anyone else has this problem:

1) Followed these directions for installing labVIEW completely:
https://wpilib.screenstepslive.com/s...5-labview-only

2) Following the instructions for the update suite completely:
https://wpilib.screenstepslive.com/s...-all-languages

3) Download all NI Updates (one at a time and restart after each)

4) We also used a different USB A -> B cable to connect to computer

The computer finally recognized the roboRIO, so we'll configure it today!

Thank you all very much for the help, we really appreciate it. Good luck!