|
|
|
 Truly good teasers should give people a good place to start guessing, while still leaving some mystery and uncertainty. - Travis Covington [more] |
 |
|
|||||||
|
||||||||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Truly good teasers should give people a good place to start guessing, while still leaving some mystery and uncertainty. - Travis Covington [more] |
|
|
|||||||
|
||||||||
|
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
#1
|
||||
|
||||
|
Re: Tote CAD model dimensional error
 This is what I found in looking at the supplier models. They're definitely off. So long as you're aware of it this shouldn't be a huge problem. Working on a solution now. 
|
|
#2
06-01-2015, 14:58
|
||||
|
||||
|
Re: Tote CAD model dimensional error
I made a mock up of the tote based on the supplier's website.
It is worth noting the "official" model from FIRST also has an incorrect height. The mock up will go live on SOLIDWORKS website tonight. 
|
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
