|
|
|
 I'll do my best, but I'm this --><-- close to telling our drivers they're NASCAR styling it this season..."Sorry boys and girls, left turns only!" - Mr. Lim [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| I'll do my best, but I'm this --><-- close to telling our drivers they're NASCAR styling it this season..."Sorry boys and girls, left turns only!" - Mr. Lim [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#4
06-01-2015, 15:31
|
||||
|
||||
|
Re: Motor suggestion pls!!!!!!
1 CIM motor going through a 12:1 versa planetary driving a 2 inch pitch diameter(1 inch R) sprocket.
Can lift a 62.5 pound(1000 ounce) load at 335RPM or 3 feet per second. At 35 amps and 60% out of 64.7% max motor efficency. Torque at motor 83.3 oz-in. At sprocket with no accounting for losses in 1000 oz-in at a lever arm of 1 inch. TL  R CIM motor handles it like a boss! 1 Mini CIM should be able to lift the load, but slower. 2 Mini CIMs should take it like a champ. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode