Go to Post To think that one can "learn" engineering in 6 weeks while under the strain of building a robot too is proposterous. FIRST isn't about teaching. It's about inspiring. - Collin Fultz [more]
Home
Go Back   Chief Delphi > Technical > Electrical
CD-Media   CD-Spy  
portal register members calendar search Today's Posts Mark Forums Read FAQ rules

 
Closed Thread
Thread Tools Rating: Thread Rating: 6 votes, 5.00 average. Display Modes
  #1   Spotlight this post!  
Unread 03-01-2015, 11:57
Thad House Thad House is offline
Volunteer, WPILib Contributor
no team (Waiting for 2021)
Team Role: Mentor
 
Join Date: Feb 2011
Rookie Year: 2010
Location: Thousand Oaks, California
Posts: 1,106
Thad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond repute
New main battery connectors allowed

According to R25, the main battery connector is allowed to be any of the connectors from the SB series. This is a great change, and I am happy they did this.
__________________
All statements made are my own and not the feelings of any of my affiliated teams.
Teams 1510 and 2898 - Student 2010-2012
Team 4488 - Mentor 2013-2016
Co-developer of RobotDotNet, a .NET port of the WPILib.
  #2   Spotlight this post!  
Unread 03-01-2015, 12:17
Tristan Lall's Avatar
Tristan Lall Tristan Lall is offline
Registered User
FRC #0188 (Woburn Robotics)
 
Join Date: Aug 2001
Rookie Year: 1999
Location: Toronto, ON
Posts: 2,484
Tristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond repute
Re: New main battery connectors allowed

That's an entirely reasonable change. Of course, it does make inter-team logistics potentially more difficult, but I'd recommend that if you're using a non-red/non-SB50 connection for main power, that you build and carry an adapter to the quasi-standard red SB50 connection.

There are also clones of the SB connector available from other vendors (like the AMP Power Series from TE connectivity). It might be nice for FIRST to permit those as well—consider asking on the Q&A. (If FIRST doesn't grant permission, the brand markings on the connectors will make clear who the manufacturer is, for inspection purposes.)

The Anderson SB Smart, SBS, SBE, SBO and SBX connectors may remain illegal, even if only 2 poles are installed. The Q&A should clarify this for greater certainty.


Also, as a public service announcement, note that the SB connectors (and AMP clones) are keyed: the traditional red ones won't work with anything except red and black (universal) Edit: and apparently pink also.

Last edited by Tristan Lall : 04-01-2015 at 01:48. Reason: Noting pink SB50 works too.
  #3   Spotlight this post!  
Unread 03-01-2015, 21:59
Unsung FIRST Hero
Al Skierkiewicz Al Skierkiewicz is offline
Broadcast Eng/Chief Robot Inspector
AKA: Big Al WFFA 2005
FRC #0111 (WildStang)
Team Role: Engineer
 
Join Date: Jun 2001
Rookie Year: 1996
Location: Wheeling, IL
Posts: 10,798
Al Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond repute
Re: New main battery connectors allowed

Please be aware that SB50 connectors will continue (as of this date) to be supplied on the batteries in Spare Parts at events.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
  #4   Spotlight this post!  
Unread 03-01-2015, 22:38
Thad House Thad House is offline
Volunteer, WPILib Contributor
no team (Waiting for 2021)
Team Role: Mentor
 
Join Date: Feb 2011
Rookie Year: 2010
Location: Thousand Oaks, California
Posts: 1,106
Thad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond reputeThad House has a reputation beyond repute
Re: New main battery connectors allowed

Quote:
Originally Posted by Al Skierkiewicz View Post
Please be aware that SB50 connectors will continue (as of this date) to be supplied on the batteries in Spare Parts at events.
Would an adapter to conver from SB50's to any new connector be legal? It doesn't look like it according to the rules, but it would be much easier if it was. We could just make a few adapters and solve that problem.
__________________
All statements made are my own and not the feelings of any of my affiliated teams.
Teams 1510 and 2898 - Student 2010-2012
Team 4488 - Mentor 2013-2016
Co-developer of RobotDotNet, a .NET port of the WPILib.
  #5   Spotlight this post!  
Unread 03-01-2015, 22:40
Kevin Sevcik's Avatar
Kevin Sevcik Kevin Sevcik is offline
(Insert witty comment here)
FRC #0057 (The Leopards)
Team Role: Mentor
 
Join Date: Jun 2001
Rookie Year: 1998
Location: Houston, Texas
Posts: 3,730
Kevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond repute
Send a message via AIM to Kevin Sevcik Send a message via Yahoo to Kevin Sevcik
Re: New main battery connectors allowed

Quote:
Originally Posted by Tristan Lall View Post
That's an entirely reasonable change. Of course, it does make inter-team logistics potentially more difficult, but I'd recommend that if you're using a non-red/non-SB50 connection for main power, that you build and carry an adapter to the quasi-standard red SB50 connection.
Your adapter is only going to be useful for charging batteries. R25 sounds very much like only one SB connector pair is allowed between the battery and the breaker/PDP.

In other news, the bigger connectors and larger wire that goes with them will be great for dealing with high current draws from pushing matches, etc. Next year. (Crosses fingers)
__________________
The difficult we do today; the impossible we do tomorrow. Miracles by appointment only.

Lone Star Regional Troubleshooter
  #6   Spotlight this post!  
Unread 03-01-2015, 22:46
cgmv123's Avatar
cgmv123 cgmv123 is offline
FRC RI/FLL Field Manager
AKA: Max Vrany
FRC #1306 (BadgerBOTS)
Team Role: College Student
 
Join Date: Jan 2011
Rookie Year: 2011
Location: Madison, WI
Posts: 2,085
cgmv123 has a reputation beyond reputecgmv123 has a reputation beyond reputecgmv123 has a reputation beyond reputecgmv123 has a reputation beyond reputecgmv123 has a reputation beyond reputecgmv123 has a reputation beyond reputecgmv123 has a reputation beyond reputecgmv123 has a reputation beyond reputecgmv123 has a reputation beyond reputecgmv123 has a reputation beyond reputecgmv123 has a reputation beyond repute
Re: New main battery connectors allowed

Quote:
Originally Posted by Thad House View Post
Would an adapter to conver from SB50's to any new connector be legal? It doesn't look like it according to the rules, but it would be much easier if it was. We could just make a few adapters and solve that problem.
R25 does say "connectors", but there are two connectors in the drawing.

(Of course, any adapter (if legal) is part of the ROBOT, not the battery assembly, for weight purposes.)
__________________
BadgerBOTS Robotics|@team1306|Facebook: BadgerBOTS
2016 FIRST Championship Tesla Division | 2016 Wisconsin Regional Engineering Inspiration Award

2015 FIRST Championship Carson Division | 2015 Wisconsin Regional Chairman's Award

2013 FIRST Championship Curie Division | 2013 Wisconsin Regional Chairman's Award

2012 FIRST Championship Archimedes Division | 2012 Wisconsin Regional Engineering Inspiration Award, Woodie Flowers Finalist Award (Lead Mentor Ben Senson)

  #7   Spotlight this post!  
Unread 04-01-2015, 01:56
Tristan Lall's Avatar
Tristan Lall Tristan Lall is offline
Registered User
FRC #0188 (Woburn Robotics)
 
Join Date: Aug 2001
Rookie Year: 1999
Location: Toronto, ON
Posts: 2,484
Tristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond reputeTristan Lall has a reputation beyond repute
Re: New main battery connectors allowed

Quote:
Originally Posted by Kevin Sevcik View Post
Your adapter is only going to be useful for charging batteries. R25 sounds very much like only one SB connector pair is allowed between the battery and the breaker/PDP.
It's unclear enough (given the use of the plural) that the Q&A can fill us in. I'd lean towards permitting it, since there are no new hazards caused or major advantages conferred.

(Thought experiment: if we assume that in the absence of a written quantity, the quantity depicted in R25's figure is mandatory, does that imply that we would have to prohibit a team from doubling up the wire running from the 120 A circuit breaker to the power distribution panel? What purpose would that serve, particularly since teams can use wire of arbitrarily large gauge? Alternatively, what if a team doubled up the SB connectors in parallel? Would that be permissible?)
  #8   Spotlight this post!  
Unread 04-01-2015, 09:44
Unsung FIRST Hero
Al Skierkiewicz Al Skierkiewicz is offline
Broadcast Eng/Chief Robot Inspector
AKA: Big Al WFFA 2005
FRC #0111 (WildStang)
Team Role: Engineer
 
Join Date: Jun 2001
Rookie Year: 1996
Location: Wheeling, IL
Posts: 10,798
Al Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond repute
Re: New main battery connectors allowed

One connector and one set of wires. This rule is primarily for those teams wishing to use the SB120 series with the larger wire for the primary supply wiring on their robot. As have been discussed in many previous threads, there is very little improvement using this method. Adapters from SB50 to SB120 will be allowed should the need arise to use a Spare Parts battery. Adapters will not be provided and modification of Spare Parts batteries will not be allowed.

Many people have asked over the years about failures in the SB50 connectors due to over current. I have inspected more than 20 failures of these connectors, including one of our own. Not one failed due to the current. Every one I inspected failed due to mishandling, modification or failure to engage. About half were caused by team members bending the contact springs to make insertion easier. Most of the remainder were due to severe wear and/or severe corrosion on the contact surface.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.
  #9   Spotlight this post!  
Unread 07-01-2015, 03:17
JDL JDL is offline
Systems Integrator
FRC #0498
Team Role: Mentor
 
Join Date: Jan 2011
Rookie Year: 2009
Location: AZ
Posts: 65
JDL is just really niceJDL is just really niceJDL is just really niceJDL is just really nice
Re: New main battery connectors allowed

Sounds like a solution looking for a problem.

I had a service truck with an SB50 mounted to the front bumper, I did bad things to that little connector, hard jump starts, an electric winch in the front tow receiver, never melted it.
  #10   Spotlight this post!  
Unread 07-01-2015, 09:13
MrBasse MrBasse is offline
Registered User
FRC #3572 (Wavelength)
Team Role: Coach
 
Join Date: Jul 2011
Rookie Year: 2010
Location: Norton Shores, MI
Posts: 681
MrBasse has a reputation beyond reputeMrBasse has a reputation beyond reputeMrBasse has a reputation beyond reputeMrBasse has a reputation beyond reputeMrBasse has a reputation beyond reputeMrBasse has a reputation beyond reputeMrBasse has a reputation beyond reputeMrBasse has a reputation beyond reputeMrBasse has a reputation beyond reputeMrBasse has a reputation beyond reputeMrBasse has a reputation beyond repute
Re: New main battery connectors allowed

Quote:
Originally Posted by Al Skierkiewicz View Post
... Adapters from SB50 to SB120 will be allowed should the need arise to use a Spare Parts battery. Adapters will not be provided and modification of Spare Parts batteries will not be allowed....
How can an adapter be okay when R25 clearly says:

Quote:
R25 The one (1) ROBOT battery, Anderson Power Products (or APP) 2-pole SB type connectors, the one (1) main 120-amp (120A)circuit breaker (Cooper Bussman P/N: CB185-120), and the one (1) Cross The Road Electronics Power Distribution Panel (PDP,P/N: am-2856, 217-4244) shall be connected with 6 AWG wire or larger as shown in Figure 4-2.
(emphasis mine)

I don't see an adapter anywhere in figure 4-2. If they specifically show the wiring layout they want and the lead of lead inspectors says we can ignore that, how are we to know what other rules won't be enforced at events?
__________________
Andrew Basse
Coach - FRC Team 3572 - Wavelength
  #11   Spotlight this post!  
Unread 07-01-2015, 09:30
Kevin Sevcik's Avatar
Kevin Sevcik Kevin Sevcik is offline
(Insert witty comment here)
FRC #0057 (The Leopards)
Team Role: Mentor
 
Join Date: Jun 2001
Rookie Year: 1998
Location: Houston, Texas
Posts: 3,730
Kevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond reputeKevin Sevcik has a reputation beyond repute
Send a message via AIM to Kevin Sevcik Send a message via Yahoo to Kevin Sevcik
Re: New main battery connectors allowed

Quote:
Originally Posted by MrBasse View Post
How can an adapter be okay when R25 clearly says:


(emphasis mine)

I don't see an adapter anywhere in figure 4-2. If they specifically show the wiring layout they want and the lead of lead inspectors says we can ignore that, how are we to know what other rules won't be enforced at events?
Practically speaking, an adapter is ok because Al is the chief robot inspector of FRC. CD isn't a official information outlet, so a brief clarification question in the Q&A would be wise, of course. But at least we can take Al's word here that SB120 teams won't be left out to dry regarding spare parts batteries.
__________________
The difficult we do today; the impossible we do tomorrow. Miracles by appointment only.

Lone Star Regional Troubleshooter
  #12   Spotlight this post!  
Unread 07-01-2015, 09:31
Unsung FIRST Hero
Al Skierkiewicz Al Skierkiewicz is offline
Broadcast Eng/Chief Robot Inspector
AKA: Big Al WFFA 2005
FRC #0111 (WildStang)
Team Role: Engineer
 
Join Date: Jun 2001
Rookie Year: 1996
Location: Wheeling, IL
Posts: 10,798
Al Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond reputeAl Skierkiewicz has a reputation beyond repute
Re: New main battery connectors allowed

I expect small adjustments will be made to allow teams that need to use a battery from Spare Parts. My recommendation to those teams would be to convert their robot to the SB50 connector if the need to use Spare Part batteries arises.
And while I am Chief Robot Inspector, I am not GDC and this will still require clarification in the Q&A.

Here comes my first of many warnings...
The 2015 motor rules that allow unlimited numbers of some motors does not imply that the electrical system can support multiple motor designs. A fully charged battery can supply more than 500 amps but at a vastly reduced voltage for a short time. Continuously demanding large currents from this system will lead to early battery discharge (and shortened life) and/or main breaker trips. Your mileage will vary.
__________________
Good Luck All. Learn something new, everyday!
Al
WB9UVJ
www.wildstang.org
________________________
Storming the Tower since 1996.

Last edited by Al Skierkiewicz : 07-01-2015 at 09:47. Reason: additions
  #13   Spotlight this post!  
Unread 10-01-2015, 16:14
Ken Streeter's Avatar
Ken Streeter Ken Streeter is offline
Let the MAYHEM begin!
FRC #1519 (Mechanical Mayhem)
Team Role: Engineer
 
Join Date: Feb 2005
Rookie Year: 2005
Location: Team: Milford, NH; Me: Bedford, NH
Posts: 472
Ken Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond repute
Re: New main battery connectors allowed

This question is only tangentially related to this thread, but it didn't seem that my question really warrants a new thread, either...

Is there any difference between the (old) red SB50 connectors and the (new) pink SB50 connectors in the 2015 KoP other than the color?

Two of our new battery cables (with pink SB50 connectors) from the 2015 KoP, when connected together, require herculean force (needed to mount one in a vice) to disconnect. We don't see anything immediately wrong with either of them. We've never had this happen with two of these before.

Any suggestions on what to look for to see what is wrong? The contacts appeared to be properly oriented and in the correct position.
__________________
Ken Streeter - Team 1519 - Mechanical Mayhem (Milford Area Youth Homeschoolers Enriching Minds)
2015 NE District Winners with 195 & 2067, 125 & 1786, 230 & 4908, and 95 & 1307
2013 World Finalists & Archimedes Division Winners with 33 & 469
2013 & 2012 North Carolina Regional Winners with teams 435 & 4828 and 1311 & 2642
2011, 2010, 2006 Granite State Regional Winners with teams 175 & 176, 1073 & 1058, and 1276 & 133
Team 1519 Video Gallery - including Chairman's Video, and the infamous "Speed Racer!"
  #14   Spotlight this post!  
Unread 11-01-2015, 21:38
JDL JDL is offline
Systems Integrator
FRC #0498
Team Role: Mentor
 
Join Date: Jan 2011
Rookie Year: 2009
Location: AZ
Posts: 65
JDL is just really niceJDL is just really niceJDL is just really niceJDL is just really nice
Re: New main battery connectors allowed

I didn't look at ours yet but the kids mentioned they were hard to get apart. If they are high force contacts they take about 15 pounds minimum to separate.

You can get grips for the SB series to aid in connection and disconnection if it's an issue.

Last edited by JDL : 11-01-2015 at 22:15.
  #15   Spotlight this post!  
Unread 11-01-2015, 21:54
Ken Streeter's Avatar
Ken Streeter Ken Streeter is offline
Let the MAYHEM begin!
FRC #1519 (Mechanical Mayhem)
Team Role: Engineer
 
Join Date: Feb 2005
Rookie Year: 2005
Location: Team: Milford, NH; Me: Bedford, NH
Posts: 472
Ken Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond reputeKen Streeter has a reputation beyond repute
Re: New main battery connectors allowed

Quote:
Originally Posted by JDL View Post
I didn't look at ours yet but the kids mentioned they were hard to get apart. If they are high force contacts they take about 15 foot pounds minimum to separate.
Ours are definitely taking more than 15 foot-pounds of force! We've tried with all three combinations of pairs for the three cables that came in our KoP and they are all very difficult to get apart - way too difficult to separate in the typical confines of a robot. One pair we passed around at the meeting, and nobody could separate them by hand. It was like "The Sword in the Stone" with everybody thinking it should be easy to get them apart, but nobody could! (We did manage to separate them in a vice).

Maybe the contacts are made of uru?
__________________
Ken Streeter - Team 1519 - Mechanical Mayhem (Milford Area Youth Homeschoolers Enriching Minds)
2015 NE District Winners with 195 & 2067, 125 & 1786, 230 & 4908, and 95 & 1307
2013 World Finalists & Archimedes Division Winners with 33 & 469
2013 & 2012 North Carolina Regional Winners with teams 435 & 4828 and 1311 & 2642
2011, 2010, 2006 Granite State Regional Winners with teams 175 & 176, 1073 & 1058, and 1276 & 133
Team 1519 Video Gallery - including Chairman's Video, and the infamous "Speed Racer!"
Closed Thread


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 16:14.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi