Human Player Station - Team Tote Chute Stock List (BOM)

[skottmorris]

Has anyone created a stock list to build the team human player station identified as the "Team Tote Chute" in the team drawings? The drawings are very detailed, but the team is trying to figure out how much lumber to purchase to create it.

[Hallry]

Originally Posted by skottmorris

Has anyone created a stock list to build the team human player station identified as the "Team Tote Chute" in the team drawings? The drawings are very detailed, but the team is trying to figure out how much lumber to purchase to create it.

Well, judging by the drawings for the Team Tote Chute, you need:

• 2 44.88'' x 29.25'' 3/4'' plywood
• 4 32.11'' long 2x2 lumber
• 1 31.80'' x 18.25''' 3/4'' plywood
• 1 31.80'' x 19.75'' 3/4'' plywood
• 2 6.61'' long 2x2 lumber

So, I would recommend getting 2 pieces of 4'x8' 3/4'' plywood and two 8' long 2x2 lumber. (That math works out, right?)

But of course, that's not including the separate 'Tote Chute Wall'.

[Bruceb]

I made this with one sheet of 3/4 ply and half of another sheet if 1/2 play I had laying around.
I also used about 16 ft of 2x2 I had laying around.
I DID NOT make the full door but rather implemented a simple pin arrangement that holds the tote .
I used scraps form this to make the litter chute as well.