|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#3
|
|||
|
|||
|
Re: RobotDrive
So that solved my "Robot Drive... Output not updated enough" issue and I did find that message in MotorSafetyHelper, so I was close,
But what about 2, and 3 2) Im assuming that associating a drive with controllers and then associating a Joystick to the drive is going to automatically allow me to control movement of my motors. 3) Im assuming that I will not have to capture inputs from the joystick and translate them myself to the motors. |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|