|
|
|
![]() |
|
|||||||
|
||||||||
![]() |
| Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
pic: 1899 Prototype Linear Guide
|
|
#2
|
||||
|
||||
|
Re: pic: 1899 Prototype Linear Guide
This is amazing
|
|
#3
|
||||
|
||||
|
Re: pic: 1899 Prototype Linear Guide
Beautiful as always.
|
|
#4
|
||||
|
||||
|
Re: pic: 1899 Prototype Linear Guide
Very nicely done! Loving the idea
|
|
#5
|
|||||
|
|||||
|
Re: pic: 1899 Prototype Linear Guide
Very elegant solution, nicely done.
~bookmarks~ |
|
#6
|
|||
|
|||
|
Re: pic: 1899 Prototype Linear Guide
The guides slide really well. I had a little too much fun with them today. We'll test them under load tomorrow.
![]() |
|
#7
|
||||
|
||||
|
Re: pic: 1899 Prototype Linear Guide
Amazing! That is a really nice fit. I adore wooden robots for their amazing handling of tolerances in wood.
|
|
#8
|
|||
|
|||
|
Re: pic: 1899 Prototype Linear Guide
Quote:
I'm looking forward to seeing how you tackle this year's challenge, I'm sure it will look good doing it too ![]() Last edited by Navid Shafa : 11-01-2015 at 23:54. |
|
#9
|
|||
|
|||
|
Re: pic: 1899 Prototype Linear Guide
Here's some pictures from yesterday of testing. The laser cut parts for the hook were glued together in a stack and then glued to a 2x4, which was bolted to the guides. Unfortunately, we did not wait long enough for the glue to dry, so the hook was pried off the 2x4 when we added more totes. The linear guides themselves performed perfectly.
![]() ![]() |
|
#10
|
||||
|
||||
|
Re: pic: 1899 Prototype Linear Guide
Very impressive
|
![]() |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|