My RoboRio needs a doctor

[EmileH]

Originally Posted by Qmcdonn

Did you make sure that you connected the PDP to the RoboRIO through CAN? I'm pretty sure that the PDP needs to be connected via CAN For it to work. Also make sure that you put the 10 and 20 amp fuses in the PDP.

In order for the RoboRIO to work you do not need to have it wired via CAN. The PDP can function fine without any can interfacing.

Also make SURE the 10 amp and 20 amp fuses are in their respective slots - the 20 amp fuse on the left giving power to the PCM and VRM, and the 10 amp fuse on the right for the RoboRIO power - see image below

The RoboRIO should be plugged into the CONTROLLER POWER slot with 18 - 22 wire guage.