My RoboRio needs a doctor

[EmileH]

asnell16,

Have you tried looking at the RoboRIO manual and its LED indicator section?

Confirm your PDP is outputting a proper 6.8-18V output through the CONTROLLER PWR port with a MultiMeter if you get a chance.

[MrForbes]

On thing that might help, is to post a couple of clear, large pictures of your electronics setup, so we can see if the wiring is right. It's easy to connect something to the wrong place, without realizing it. I know because I've done it.

If you get some more folks to confirm that it's all wired correctly, you can rule that out.