Build Progress?

[MrJohnston]

I've always been curious as to how quickly robots come along on other teams... So, where are you at?

[mrnoble]

CAD.

[Whippet]

CAD and a liiiiiitle bit of the kit drivetrain.

[IronicDeadBird]

Are we including field elements cause we look good there...

[AustinH]

Drivetrain is done and rolling. Speed bump field element is done. Next step is IMU integration into our mecanum drive.

The big hold up is purchasing a linear slide system. First vendor with product availability wins.

[MrJohnston]

We just need a couple of parts (currently out-of-stock) from Vex in order to complete the base - aside from a couple of sizing adjustments that may be needed later to fit our manipulators. Our two primary manipulators are being proto-typed now - but coming along. We hope to be building one/both by this weekend....

[pfreivald]

All sheet metal has been CADded and sent to Coach & Equipment for laser cutting and bending.

Most non-sheet metal parts are in some stage of being built, one is still being designed.

We hope to have every part necessary to assemble, wire, and see what goes wrong by this Saturday, though that could be optimistic by a matter of days.

[nighterfighter]

Still working on CAD, haven't ordered anything yet.

We made the kitbot though, to keep the new students entertained...

[mklinker]

CAD should be done this week! Parts should be cut this weekend. Currently driving test base.

[MrForbes]

we have prototype manipulators that can pick up the totes and containers...totes when they're upright, container either way. Working on CAD to connect them to the robot. Have a plan for most of it, there are some gaps. Got the new chassis driving around last night, after installing the new electronics in a temporary box and wiring up the drive motors.

I'm happy with our progress so far. There is a whole lot more to do.

[Dan Petrovic]

We have a Design Review tomorrow night to present the chosen concepts for this year's robot to the rest of the team and their parents. Our detailed CAD will begin on Friday and we should be able to start fabrication on Saturday.

We believe it is important to not rush the design and prototyping stages of the build cycle. If you do the math and do everything right the first time, then a robot should come together in no time even if the detailed design doesn't start until Week 3.

The tricky part, however, is doing everything right the first time.

[Joseph1825]

Hmm, I'm starting to feel more worried after reading this thread. Our team has the list of capabilities we want our robot to have done, and we have built prototypes for several ways to manipulate game pieces (several powered and several non-powered). But we haven't even started making versions that would be ready to be integrated on a robot.
But then again, we always spend more time prototyping and less time with a fully assembled robot. And it has worked out pretty well so far.

[pfreivald]

Originally Posted by Joseph1825

Hmm, I'm starting to feel more worried after reading this thread. Our team has the list of capabilities we want our robot to have done, and we have built prototypes for several ways to manipulate game pieces (several powered and several non-powered). But we haven't even started making versions that would be ready to be integrated on a robot.
But then again, we always spend more time prototyping and less time with a fully assembled robot. And it has worked out pretty well so far.

This is the fastest year we've ever had. All our prototypes worked well right out of the gate--and I'm sure we'll have some unknown-but-anticipated problems when we move into the assembly stage, and more still in initial testing.

[Joe G.]

Prototyping complete, design selected, and CAD at 65%. Two major subsystems down, with another well on its way. Haven't made a single part for the real robot yet.

[orangemoore]

We are currently prototyping manipulators, building a test elevator, and buying parts for our drive base.

This year is the fastest we have ever moved and are looking forward to the rest of the season.