Accessing Joystick Axes in Command-Based Robot

The problem was too many penalties with too much room for judgment. - dbSparx [more]

		Chief Delphi > Technical > Programming > C/C++
Accessing Joystick Axes in Command-Based Robot

Thread Tools

Rate Thread

Display Modes

01-15-2015, 03:01 PM

Sparkyshires Sparkyshires is offline

Registered User

AKA: Michael Shires

FRC #0384 (Sparky)

Team Role: Programmer

Join Date: Jan 2012

Rookie Year: 2006

Location: Virginia

Posts: 226

Sparkyshires is an unknown quantity at this point

Re: Accessing Joystick Axes in Command-Based Robot

Thank you guys so much, that helped a lot! I finally got it working the way I wanted it to.

Yeah our team normally has it so that the trigger has to be pulled to drive the robot, just for safety's sake.

and I had no idea that you could just put a '-' in front, I always wrote it as -1.0*speed xD

__________________
"Measure with a micrometer, mark with chalk, cut with an axe."

« Previous Thread | Portal | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts vB code is On Smilies are On [IMG] code is On HTML code is Off

Forum Jump

All times are GMT -5. The time now is 09:51 AM.

The Chief Delphi Forums are sponsored by Innovation First International, Inc.