Axis Camera not sending image data?

[cloc1601]

We are using LabVIEW and an Axis M1011-W camera to try to get our vision system to work. I made a fresh roboRIO prjoect on LabVIEW, set up the camera using the 2014 Axis Camera Setup tool from FIRST, and deployed my project.

When we switched our camera mode to IP camera, our dashboard lagged behind terribly (As in, when we pushed a joystick, we would get the robot's report on the joystick about every 5 seconds). We got this error on the dashboard:

ERROR -1074360311 occurred at IMAQdx Open Camera.vi
NI-IMAQdx: (Hex 0xBFF69009) Camera not found

What can we do to set up our robot's camera? We also recently ordered a new Axis M1013 camera, would that camera possibly work better?