|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#1
|
|||
|
|||
|
Which Ultrasonic Sensors for positioning
Something we want to try out.
We want to make sure we use the proper sensors The idea is to have a sensor on either side of the robot the width of a crate. The robot can move back and forth, left and right. The idea is: 1) Move the robot within a few inches of the crate. 2) The operator clicks a button the the robot moves to the left or right to center it on the crate. 3) The sensors will mark when both are not directly in front of the crate, i.e. they are in either side of the crate. We need a sensor with a thin beam. I have looked at the two Andy Mark has available MB1200 and MB1013 Does anyone have experience with either, or a better one. Again the beam needs to be thin to mark when the sensor is no longer in front of the crate. Thanks to all. MrJagDad Mentor Team 4361 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|