|
|
|
 Every year, everyone reads too much into the hints given by Dave. - EricH [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
|
|
| Every year, everyone reads too much into the hints given by Dave. - EricH [more] |
|
|
|||||||
|
||||||||
|
|
Thread Tools | Rate Thread | Display Modes |
|
#4
17-01-2015, 16:35
|
|||||
|
|||||
|
Re: Has anyone figured out limit switches for 2015
That's a pretty typical use of a limit switch. Here's how I would do it, using an In Range and Coerce function. When the switch value is not true, the motor control is allowed to vary between -1 and +1. When the switch is true, the motor is only allowed to be between -1 and 0, keeping it from traveling any farther forward.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode