|
|
|
 Belts are a fine way of transferring power in a robot. Like chains, gears, drive shafts, viscous couplings or any other means of transmission they require some care and attention on you're part. But no one said this robot stuff was going to be a cake walk. - Andy A. [more] |
 |
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating: 
|
Display Modes |
|
#6
18-01-2015, 10:24
|
||||
|
||||
|
Re: PID programming help
To Ether and Ross,
Thank you for the links and information, it helped up to a point but we have found, like many others that our single very precious resource was being used up at an alarming rate. So we have chalk this one up to; yes failure is an option but lets learn from it and move forward. Perhaps after regional’s we might re-visit the task but a “101 Programming a PID function with examples” would sure help. Just in case, the “precious resource” is TIME. Five weeks is just to short. We lose a week for exams  Post #12 http://www.chiefdelphi.com/forums/sh...hreadid=133100 also has a very nice to help understand what a PID does. Last edited by Tem1514 Mentor : 18-01-2015 at 10:33. Reason: more info found 
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Threaded Mode