|
|
|
![]() |
|
|||||||
|
||||||||
|
|
Thread Tools |
Rating:
|
Display Modes |
|
#14
|
|||||
|
|||||
|
Re: Anderson PowerPole for CAN bus?
We're planning on using some crimp connectors to just crimp the wires together once we have all of the Talons mounted. Minimizes the probability of failure and we're not too concerned with having to cut the wires when were done, saying as we'll only be doing it a few times a year in a worst case scenario.
|
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|